PVDF Pipe Sizes and Dimensions | The Complete Guide

Hello people; I will share an extensive guide on PVDF Pipe Sizes and PVDF Pipe dimensions today. So without further ado, let’s get started.

PVDF plastic is a type of thermoplastic fluoropolymer with a wide range of applications due to its impressive properties.

These include exceptional chemical resistance, good processability, high mechanical strength, Piezoelectric and pyroelectric properties, and a high heat deflection temperature under load.

These attributes make PVDF stand out among other thermoplastics.

PVDF Pipe Sizes and Dimensions 

SizeWall ThicknessInner DiameterOuter DiameterWeight/Foot(lbs.)
Pressure rating at 73°F
1 1/

The above data has been estimated as per ASTM standards. Data related to sizes and dimensions are subject to manufacturing tolerances and may vary by brand.

Interesting Read – What are PVC Pipe Sizes? | What are PVC Pipe Dimensions? | The Complete Guide

Salient Features of PVDF Pipes 

  • No roughing like metal pipes. Since there is no roughing, passivation is also not needed. (Passivation is constantly required in SS and metal pipes)
  • Easy to maintain with meager costs. The PVDF pipe boasts a melting point of 178°C to resist steam sterilization. But also can withstand sterilization by ozone without post‐sterilization cleaning.
  • PVDF is one of the hardest fluoropolymers and boasts the highest tensile strength in all plastics. Its abrasion resistance is often compared with stainless steel.
  • PVDF has excellent resistance to deionized water, outstanding thermal stability, and high resistance to sunlight degradation. Its low slip coefficient makes it difficult for microorganisms like fungi and bacteria to grow on it. On the contrary, a limitation exists on how much a metal pipe can be smoothed out. On this front, metal pipes certainly don’t stand a chance against plastic pipes, let alone pipes made from PVDF.
  • PVDF contains no additives. Meaning nothing will leach out. It is manufactured with 100% pure resin.
  • Long service life, even under severe corrosive conditions.

PVDF Pipe Applications 

PVDF plastic is known for excellent mechanical and Piezoelectric properties. Thus it is utilized in multipurpose specialty plumbing well suited for several industries.

It is often considered the best option for chemical processing and transfers within pharmaceuticals, electrical systems, food & beverage petrochemicals, and energy applications.

Chemicals handled and transferred in PVDF piping include bromide solutions, sulphuric acid, hydrochloric acid, nitric acid, alcohols, chlorinated compounds, aromatic solvents, and aliphatic solvents.

The most commonly used products for PVDF piping include food syrups, wine, beer, ultrapure water, various liquid beverages, and pharmaceutical chemicals & compounds.

However, PVDF piping is not limited; it has been rapidly accepted for transferring engine fuels, diesel, gasoline, refined or unrefined oil, and ethanol and biodiesel blends.

Uses By Industries

PVDF pipe sizes and dimensions differ from other pipes due to their applications. Below are some of the significant applications sorted by verticals.

Metal Preparation – High-temperature Acids

Petrochemicals – Alkylation acids, hydrocarbon mixtures

Waste Water – Chemical Mixture, Outdoor Exposure

Food & Beverages – Steam cleaning, aggressive food agents, acidic foods

Pulp and Paper – Bleaching Chemicals and acids

Semiconductor – Acids, ozone, high purity water, FM 4190

Mining – Acidic mixtures, abrasive slurries

Biotech/Pharmaceutical – Ozone, cleaning agents, acids

Plenum Pipe – Acid waste drainage

Fascinating Read – HDPE Pipe Sizes and Dimensions | A Complete Analysis


Can your thread PVDF pipe?

PVDF pipes and PP, PVC, and CPVC can be threaded using special pipe dyes with special fittings provided with threaded connections. The only thing that needs to be taken care of is that the threaded pipe must be derated by 50% from solvent-cemented systems.

Which one is better, PVDF or PVC?

Both PVDF and PVC are reliable piping options but are not similar. They have many differences in properties. PVDF is more mechanically durable and has excellent chemical, UV, and nuclear radiation resistance. PVDF is joined using the heat fusion welding technique, and PVC is joined using primers and cement.

Which is better, PVDF or metal pipes?

The most significant difference is that PVDF pipes are more inert and do not require passivation. Thus, it will never rust, but metal piping is heavily susceptible to environmental corrosion. PVDF pipes are inert to hydrogen gas, unlike metal and SS pipes, making them suitable for transferring chlorine-based chemicals and compounds such as Hydrochloric acid (HCL). Apart from that, installation costs for both pipes are similar.

Suggested Read

The Conclusion 

That is all I wanted to say about PVDF Pipes Sies | PVDF Pipe Dimensions. The fluoropolymer is packed with fantastic mechanical and physical properties, making it a one-of-a-kind product in the market. PVDF pipe is the prime choice if you’re looking to work with ultrapure water or hazardous chemicals.

It is essential to keep in mind that you should consult with the manufacturer thoroughly before making any decisions.

Thank you for taking the time to read this, and have a wonderful day.

Leave a Comment